Bilt Hamber TOUCH-ON Ceramic Spray Sealant and Shampoo 30ml
TOUCH-ON is a pressure washer, pump-sprayer, or bucket-applied durable hydrophobic ceramic paint protection treatment. It features low-foaming, powerful detergency for most second-stage bucket washes, allowing you to further clean the paint while simultaneously applying protection following a TOUCH-LESS cleaning.
Once applied, TOUCH-ON features dirt-releasing properties that work in conjunction with TOUCH-LESS in subsequent wash routines to produce superior contactless results.
Packed in single-dose 30ml sachets, it should be applied no more than once per month.
TOUCH-ON is water-based, non-flammable, and contains no alcohol or petrochemical solvents.
Quick guide
- pH approx. 12
- No caustic soda
- No phosphates
- No solvents
- No NTA
- Bio-degradable
How to use Bilt Hamber TOUCH-ON
The vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork.
Pressure Washer Application
Add 30ml into your foam gun reservoir and top up to 300ml with clean, cool water. Shake well and apply under pressure to the entire vehicle. Immediately rinse using a pressure washer. Dry the vehicle with a microfiber towel or an air blower.
Bucket Application
Pour 1 to 2 sachets into a bucket, fill with 10 liters of warm water (preferably from a fast-running tap), and mix well. Apply using your preferred wash mitt and rinse with clean water. Dry the vehicle with a microfiber towel or an air blower. Please note: this is not a high-foaming bucket wash.
Trigger Sprayer Application
Add 30ml to a trigger bottle and top up to 1 liter with water (preferably demineralized or deionized). Shake well. Apply liberally panel by panel, then thoroughly rinse with a pressure washer or hose. Dry with a microfiber towel or air blower.
Note: We do not recommend applying more than once a month. The car must not be allowed to air dry, as water spotting may occur.
TOUCH-ON is a pressure washer, pump-sprayer, or bucket-applied durable hydrophobic ceramic paint protection treatment. It features low-foaming, powerful detergency for most second-stage bucket washes, allowing you to further clean the paint while simultaneously applying protection following a TOUCH-LESS cleaning.
Once applied, TOUCH-ON features dirt-releasing properties that work in conjunction with TOUCH-LESS in subsequent wash routines to produce superior contactless results.
Packed in single-dose 30ml sachets, it should be applied no more than once per month.
TOUCH-ON is water-based, non-flammable, and contains no alcohol or petrochemical solvents.
Quick guide
- pH approx. 12
- No caustic soda
- No phosphates
- No solvents
- No NTA
- Bio-degradable
How to use Bilt Hamber TOUCH-ON
The vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork.
Pressure Washer Application
Add 30ml into your foam gun reservoir and top up to 300ml with clean, cool water. Shake well and apply under pressure to the entire vehicle. Immediately rinse using a pressure washer. Dry the vehicle with a microfiber towel or an air blower.
Bucket Application
Pour 1 to 2 sachets into a bucket, fill with 10 liters of warm water (preferably from a fast-running tap), and mix well. Apply using your preferred wash mitt and rinse with clean water. Dry the vehicle with a microfiber towel or an air blower. Please note: this is not a high-foaming bucket wash.
Trigger Sprayer Application
Add 30ml to a trigger bottle and top up to 1 liter with water (preferably demineralized or deionized). Shake well. Apply liberally panel by panel, then thoroughly rinse with a pressure washer or hose. Dry with a microfiber towel or air blower.
Note: We do not recommend applying more than once a month. The car must not be allowed to air dry, as water spotting may occur.
Description
TOUCH-ON is a pressure washer, pump-sprayer, or bucket-applied durable hydrophobic ceramic paint protection treatment. It features low-foaming, powerful detergency for most second-stage bucket washes, allowing you to further clean the paint while simultaneously applying protection following a TOUCH-LESS cleaning.
Once applied, TOUCH-ON features dirt-releasing properties that work in conjunction with TOUCH-LESS in subsequent wash routines to produce superior contactless results.
Packed in single-dose 30ml sachets, it should be applied no more than once per month.
TOUCH-ON is water-based, non-flammable, and contains no alcohol or petrochemical solvents.
Quick guide
- pH approx. 12
- No caustic soda
- No phosphates
- No solvents
- No NTA
- Bio-degradable
How to use Bilt Hamber TOUCH-ON
The vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork.
Pressure Washer Application
Add 30ml into your foam gun reservoir and top up to 300ml with clean, cool water. Shake well and apply under pressure to the entire vehicle. Immediately rinse using a pressure washer. Dry the vehicle with a microfiber towel or an air blower.
Bucket Application
Pour 1 to 2 sachets into a bucket, fill with 10 liters of warm water (preferably from a fast-running tap), and mix well. Apply using your preferred wash mitt and rinse with clean water. Dry the vehicle with a microfiber towel or an air blower. Please note: this is not a high-foaming bucket wash.
Trigger Sprayer Application
Add 30ml to a trigger bottle and top up to 1 liter with water (preferably demineralized or deionized). Shake well. Apply liberally panel by panel, then thoroughly rinse with a pressure washer or hose. Dry with a microfiber towel or air blower.
Note: We do not recommend applying more than once a month. The car must not be allowed to air dry, as water spotting may occur.
